YLC900 Series Full Span Bridge Beam Dolly

YLC900 Series is a multiple axle rubber wheeled dolly use to deliver full span bridge beam with loading capacity up to 900 ton and a maximum length up to 36m. This remarkable giant machine was extensively used for the construction of few thousands km of high speed railway bridges in Mainland China and in Taiwan island.

Wheels are powered by hydraulic motors and steering is by means of hydraulic cylinder. Driver Cabin is provided and wireless control system is part of the supply for convenience of contractor. Safety features are always main consideration of HCR equipments. Limit switch, emergency break switch at varies location, sensors, auto alignment system etc. are part of the safety controlling device that installed in the dolly.

YLC900 Series Full Span Bridge Beam Dolly Specification

Item	Description		Specification
1	Model		Rubber Wheeled
2	Carrying Capacity		900t
3	Tire Pressure		0.6 Mpa
4	Turning Radius		26.3m
5	Steering Angle		±30°
6	Self weight		270t
7	A/P precision		±100mm
8	Control Mode		Driver Cabin and Wireless control
9	Engine		Turbocharged with water cooler
10	Travelling Speed	With Load	0～5 km/hr
		Without Load	0～10 km/hr
11	Max. Bridge Slope	Longitudinal	5%
		Transverse	4%
12	Hoisting Speed	With Load	0～０.５m/min
		Without Load	0～１m/min
13	Power output		2 x 400 kW

GTYLC-100 Series Rubber Wheeled Beam Dolly

YLC-L Series Rubber Wheel Dolly is designed for transportation of Bridge Beams at site; mainly from casting yard to the erection point. Commonly use as part of the system with DJ Series or SJH Series Beam launcher for Bridge Beam erection. YLC-L Series Rubber Wheeled Dolly is powered by diesel engine.

YLC900 Main Specification

Model		GTYLC-100
Type of Engine		EQC230
Power of Engine		170KW
Torque		2200r/min
Reduction Ratio		1:510
Levels of Combination Gear Changing Speed		4 levels
Moving Speed		m/min Loaded Moving Speed	km/h Loaded Moving Speed
First Level Speed	Second Level Speed
1st Gear	Reverse Gear	14.81	0.89
2nd Gear	Reverse Gear	25.71	15.4
3rd Gear	Reverse Gear	45.22	2.71
4th Gear	Reverse Gear	71.94	4.32
5th Gear	Reverse Gear	110.79	6.65
Reverse Gear	Reverse Gear	13.53	0.81
Moving Speed		m/min Unloaded Moving Speed	km/h Unloaded Moving Speed
First Level Speed	Second Level Speed
1st Gear	≥ 3rd Gear	42.47	2.55
2nd Gear	≥ 3rd Gear	73.71	73.74.421
3rd Gear	≥ 3rd Gear	129.67	7.78
4th Gear	≥ 3rd Gear	206.30	12.38
5th Gear	≥ 3rd Gear	317.7	19.06
Reverse Gear	≥ 3rd Gear	38.79	2.33
Main Dolly Length		7,000MM
Secondary Dolly Length		4,200MM
Height		1,200MM
Main Dolly Wheels Length on Straight		1,800MM
Main Dolly Wheels Length on Turning		1,900MM
Secondary Dolly Wheels Length		1,900MM
Turning Radius		10,000MM
Adopted Slopes		Longitudinal\Transversal（5%\6%）

YLC Series Beam Trolley (on Track)

YLC Series Beam Trolley is designed for transportation of Bridge Beams at site running of track. It is also commonly use as part of the system with DJ Series or SJH Series Beam launcher for Bridge Beam erection. YLC Series Beam Trolley is powered by Electric Motor.

YCL Series Beam Trolley consisted of 2 parts; an active Trolley and a passive Trolley. The active Trolley will be situated at the rear with a driver seat and generator set pulling behind. The trolley is designed for balancing of speed and stability.

YLC Series Beam Trolley (on Track) Specification

	Description	Unit	Value
1	Total capacity	t	80t ~ 400t
2	Total weight of Beam Trolley	t	6t ~ 20t
3	Power supply	kW, V	25kW ~ 160kW, 380/415V
4	Min horizontal radius, R	m	200m ~
5	Moving speed with load	m/min	5
6	Moving speed without load	m/min	10